Leander Custom Cabinets
Cabinet Refacing And Refinishing in Leander, TX
Cabinet refacing and refinishing in Leander, TX, a budget alternative to full replacement. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Leander and nearby communities.
The cabinet layout works fine. It's the finish that's the problem: scratched doors, dated stain, hardware that looks like it's from another decade.
Refacing and refinishing fixes the look without tearing out boxes that are structurally still good. Leander Custom Cabinets handles both: new door fronts over existing boxes, or a full strip-and-refinish when the wood itself just needs a refresh.
What's included
What's Included with Cabinet Refacing And Refinishing
Typically included: - Optional: Customer prep:
- Cabinet box inspection and assessment — Surface prep: cleaning, sanding, and minor repairs -.
- New door and drawer front installation or refinish — Hardware upgrade
- Veneer application on cabinet boxes
- Crown molding addition
- Soft-close hinge upgrade on existing doors
- Clear cabinet contents before the assessment visit
- Have a finish or color direction in mind, even rough
Want a clearer scope?
Get a Free EstimateCabinet Refacing And Refinishing
How Refacing and Refinishing Works
- Initial Inspection — We assess existing cabinets to determine refacing or refinishing needs.
- Surface Preparation — Cabinet surfaces are cleaned and prepped for new materials.
- Door Replacement — New doors are fitted to update the cabinet's appearance.
- Veneer Application — Veneer is applied to cabinet boxes for a refreshed look.
- Finish Coating — A new finish is applied to match the updated cabinet style.
- Final Detailing — Hardware and trim are adjusted for a polished final result.
Questions about this?
Get a Free EstimateCost
What does a Cabinet Refacing and Refinishing cost in Leander?
Refacing generally costs less than full replacement since the existing boxes stay in place. Compare this against full replacement, which usually runs higher, during a free estimate.
| Project type | Typical range | What’s included |
|---|---|---|
| Refinish only | $1,500–$3,500, | strip, stain or paint, and reseal existing doors and boxes. |
| Door and hardware replacement | $3,000–$6,000, | new door fronts and updated pulls over existing boxes. |
| Full refacing with veneer | $4,500–$8,000, | new doors plus veneer over all visible box surfaces. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials and Methods for Cabinet Refacing and Refinishing
Veneer Sheets
Refreshes box surfaces without the cost of new boxes.
Replacement Cabinet Doors
Updates the whole look with minimal demolition.
Wood Fillers
Repairs small dings and gouges before refinishing.
Stain Finishes
Restores wood tone where the old finish has faded or worn.
Hardware Upgrades
New pulls and knobs that finish the updated look.
Protective Topcoat
Seals the new finish against daily kitchen wear.
Questions on materials?
Get a Free EstimateCodes & permits
Permits and Codes for Cabinet Refacing and Refinishing
Check with your local county office. Leander spans both Williamson and Travis County, and rules shift by jurisdiction.
| Typically needs a permit | Often no permit |
|---|---|
| Projects that involve electrical rerouting for new under-cabinet lighting | Door and drawer front replacement |
| Any plumbing relocation done alongside the refacing | Refinishing existing boxes without structural changes |
| — | Hardware swaps |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Cabinet Refacing and Refinishing
| DIY | Hire a pro |
|---|---|
| Simple hardware swaps on doors that are otherwise in good shape | Full door replacement where fit and alignment matter |
| Light touch-up staining on minor scuffs | Veneer application, which requires even surface prep to avoid bubbling |
| — | Color matching a new finish across an entire kitchen |
Not sure DIY vs pro?
Get a Free EstimateFAQs
Cabinet Refacing and Refinishing FAQs
Is it cheaper to reface cabinets or replace them entirely?
Refacing almost always costs less since the boxes stay in place. Full replacement makes more sense if boxes are damaged or you're changing the layout.
How long does refacing take compared to full replacement?
Refacing typically takes 1 to 3 weeks, much shorter than the 4 to 8 week lead time for full custom replacement.
Before & after
Before and After Cabinet Refacing and Refinishing
Before 
After
Next step
Get a Cabinet Refacing and Refinishing Estimate in Leander
Request a free estimate and we'll tell you honestly whether refacing or replacement fits your cabinets best. Home
How it works
Our process
Step 1Initial Inspection
We assess existing cabinets to determine refacing or refinishing needs.
Step 2Surface Preparation
Cabinet surfaces are cleaned and prepped for new materials.
Step 3Door Replacement
New doors are fitted to update the cabinet's appearance.
Step 4Veneer Application
Veneer is applied to cabinet boxes for a refreshed look.
Step 5Finish Coating
A new finish is applied to match the updated cabinet style.
Step 6Final Detailing
Hardware and trim are adjusted for a polished final result.
More services
Other Custom Cabinets services
Custom Kitchen Cabinets
Custom kitchen cabinets built to replace builder-grade boxes with fitted hardwood cabinetry and a free estimate.
Custom Kitchen Remodels
Custom kitchen remodels in Leander, TX: new cabinetry, layout changes, and finish work. Free estimates for full kitchen projects.
Built-In Shelving and Wall Units
Custom built-in shelving and wall units in Leander, TX designed to match existing trim and finish unused wall space. Free estimates.
Ask about Cabinet Refacing And Refinishing
Tell us about the project and how to reach you.